Can You Use Metal Paint on Woodwork?


Are you trying to renovate your woodworking piece, but you only have metal paint remaining in your storage? So, you think if you can use metal paint on your woodwork. Lucky for you because we will answer that question for you in this article.

Generally, you can use metal paint on woodwork in different colors like Gold, Chrome, Silver, Copper, and Rose. You can use spray cans and brush-on paints in the application. Always remember, preparation of the wooden object is the most important thing to do regardless of the kind of color. If working on metal paint, make sure that the surface is clean and dry. Also, you have to make sure to use the appropriate undercoat.

Using metal paint has its advantages and disadvantages. You can, of course, use metal paint on wood but under some conditions. So, let us help you understand Metal Paints for better and more efficient use.

Can You Use Car Paint on Wood?

As mentioned, you can use any paint on wood. So, car paint would also be excellent. However, you have to put the condition of the surface for it to accept adhesion. First, smoothen the surface. Clean it and make sure that the area is dry.

Finally, coat it with an acrylic latex primer to avoid peeling off the paint soon after the application. Moreover, find out the best strategy for applying Car Paint on the wood because they have relatively thin and runny composition. Otherwise, it may give you a saggy finish. 

How to Use Car Paint on Wood?

Here’s a short and simple method of applying Car Paint on wood. This process may also be useful for using Metal Paints since they almost have the same texture, components, and consistency.

  • STEP 1: Prepare the Surface. Make the surface of the material ready by smoothing it and making sure that it’s dry. This step applies to both bare or previously painted lumber. Then, wipe the wood with a dry cloth.
  • STEP 2: Cover-Ups. Cover the portions of the wood that you want it unpainted using painter’s tape. Also, you may want to cover the surface of the table that you’re going to use to support the material. Protect the flooring by covering it with plastic drop cloths.
  • STEP 3: Apply the Primer. Pour at least one gallon of acrylic latex bonding primer into two gallons of painter’s pot. Then, apply the first coat of primer on to the wood using a 3 to 4 inches latex paintbrush. Let the primer coating dry for a minimum of three hours.
  • STEP 4: Wash the Brush with Water. It’s because you’re going to use if for the actual Car Painting. You can use a new one, but it’s more efficient to use the first brush. 
  • STEP 5: Mix Your Paint. Most Car Paints are ready for painting. Depending on the manufacturer, always ask the paint seller or read the instructions to get the right amount of paint consistency.
  • STEP 6: Start Painting. Paint two to three coatings of the Car Paint. Avoid over-applying, and do it smoothly. Then, wait for a minimum of two hours to dry each layer of the paint.




What are the Essential Things to Consider When Painting Wood?

  • Make sure that the moisture content of the wood is within the acceptable range. Otherwise, the finish will fail or may cause an increase in the degradation rate of the wood faster.
  • Use a primer as an initial coating and apply thin layers of paint. This setup creates a seal layer for an improved appearance.
  • Dry each coat of metal paint before applying the next one.
  • Since metal paints are not primarily for wood, expect less stable and decreased durability on the final result.
  • Use the right coating for the right surface and follow the correct preparation instructions. 
  • Talking to an expert or the paint seller is the best way to know what is the suitable undercoat for your wood.
  • When you are painting your woodworking projects, starting from the top going down to smooth the paint drips as you work downwards.

What Paint Should You Use on Wood?

If your project involves furniture, your best option is to use satin or semigloss finish in either latex or oil-based paint. We have been mentioning the importance of applying primer before the actual painting, and match it with your color. For example, use a latex primer for latex paints – as simple as that.

How to Choose the Right Paint for Each Kind of Material?

Any paint is the medium that gives life to any workpiece. For only a few buckets, you can have a beautiful color that can transform anything into something fresh, unique, and astonishing. With different choices out there, it is essential to choose the right type of paint for the right material. Doing so will give you the best results and finishes. 




  • Both Painted or Sealed Wood and Paneling. First, clean the surface with a non-residue cleaner and smoothen it with 150-grit sandpaper. Clean the dust off with a cloth or rag. Apply the primer coating with a stain-blocking primer, and use latex paints for topcoats.
  • Bare Wood. After sanding the surface with fine sandpaper, coat the entire surface of the exposed wood with a stain-blocking primer. Then, you can use either high-quality latex or oil-based paint. Don’t forget to sand the surface between dried coats with 320-grit sandpaper. 
  • Laminate Countertops and Cabinet Faces. For preparation, rough up the surface using 150-grit sandpaper. Then, use a formulated primer, especially for non-porous surfaces. Apply at least two coats of acrylic latex enamel as the topcoat.
  • Plastic. Sand the material lightly using 320-grit sandpaper and rinse thoroughly. For painting, you can spray paint formulated for plastic or exterior-grade acrylic enamel. Either color will give you your desired result for any plastic workpiece.
  • Metal. Remove all rust and make sure that the surface is dry and clean. You can use any formulated paint for metal after applying an exterior-grade primer. It is the same kind of paint for steel, aluminum, and iron.
  • Glass. First, clean the surface. Both enamel and latex paint is suitable for the job. You can also check the hardware store for paint formulated for glass use. Choose lighter colors for better light transmission.
  • Concrete Block. Remove all loose particles and mortar using a wire brush. Start with applying high-quality acrylic latex primer, and finish it with acrylic latex paint. You have to wait for at least 90 days before painting for new concrete and block installations.
  • Ceramic Tile and Porcelain. Apply a top-quality acrylic primer and finish it with a semi-gloss acrylic interior paint. For best results, allow the paint to cure for at least ten days or two weeks before using the surface.

FREQUENTLY ASKED QUESTIONS

Can You Use Hammerite Metal Paint on Wood?

Hammerite Metal Paint is also suitable for wood and other types of plastic like drainpipes and guttering. When using bare wood, make sure to apply water-based acrylic wood primer. It will help you get a better and more beautiful finish. Then, abrade the painted surface if you want to remove remaining contaminants from the paint. 

Does Water-Based Paint Wash Off?




Using water-based paint doesn’t wash off immediately when spilled with water, especially when appropriately dried. In the case of accidentally dropping water-based on cloth or other material, you can remove it faster than oil-based colors. 

What Removes Water-Based Paint at Home?

You can remove it by scraping off as much paint from the wood using a scraper or a butter knife. Then, mix ¼ cup of lemon juice and ¾ cup of rubbing alcohol in a small bowl. Pour the mixture on a soft cloth, and scrub off the paint using a non-abrasive nylon brush or toothbrush. It helps in softening the color and remove it effortlessly.

Final Words

Overall, you can use almost any kind of paint on wood. What’s more important is to follow the right method in applying colors on wood. Don’t forget to use the appropriate coating for the surface, clean the area that you want to paint, and dry it. Always check the moisture content before painting to achieve the best result.

Recent Content

© 2021 Copyright Woodworking Squad